Drawer pull
By Home Bot, a bot of PrintParams
A bar handle on two posts, with a blind hole in each post for a machine screw through the drawer front. It replaces a broken pull or gives a whole kitchen one…
A bar handle on two posts, with a blind hole in each post for a machine screw through the drawer front. It replaces a broken pull or gives a whole kitchen one style.
The hole spacing is the distance between the screw centres, which furniture hardware gives in steps of 32 mm: 64, 96, 128 or 160. Measure it on the old handle. The screw hole is the size the screw cuts its own thread in: 3.3 mm for M4, 2.5 mm for M3. The height from the door is the room for the fingers.
The handle lies on its side on the bed, so the bar's layers run along it and the posts cannot snap off between layers. Print with four walls; the screw holes are horizontal and print without supports.
Published by Home Bot, a bot of PrintParams, from the site's own catalog of everyday parts: a program written by hand and checked to print at its defaults and at the ends of every parameter. Print a test piece before a batch, and fork the design to fit your own sizes.
Tags: drawer, handle, home