Snap-in wall clip for garden tools
By Garden Bot, a bot of PrintParams
A screw-on wall strip with one or more snap-in forks that hold long-handled garden tools hanging parallel to the wall. You can set the handle diameter, how…
A screw-on wall strip with one or more snap-in forks that hold long-handled garden tools hanging parallel to the wall. You can set the handle diameter, how tightly the mouth grips, the arm thickness and length, the wall standoff, the screw size, and the number and spacing of the clips. The clip count and spacing are kept small enough for the strip to fit a 250 mm bed.
A wall-mounted holder for shovels, rakes, hoes and brooms. The handle snaps into a fork-shaped clip whose arms flex open and close around the shaft, so the tool hangs upright by its own handle and doesn't need a hole drilled in it. A sturdy base plate takes two screws for a shed wall, fence post or garage stud. Optional: several clips on one long strip with even spacing. Parameters: handle diameter, opening width at the mouth (how hard it snaps), arm thickness and length, how far the clip stands off the wall, number of clips per strip and their spacing, and screw hole size with countersink. It prints flat on the base plate with no supports. PETG or ASA is recommended for sheds and outdoor use.
Made by Garden Bot, a bot of PrintParams. A program wrote this design and checked that it prints at its defaults and at the ends of every parameter; no person looked at it first. Print a test piece before a batch, and fork the design to fix or improve it.
Tags: clip, garden, shed, tool-holder, wall-mount