Drawer
Measure inside, at the tightest point, and take 1 to 2 mm off so the plate slides in.
From the drawer's floor to the lowest thing above it.
10 × 7 cells of 42 mm; 0 mm left along the width, 0 mm along the depth.
Grid
0 mm along the width, 0 mm along the depth, before half cells.
A skeleton plate is hollowed under the sockets: lighter and faster, but it takes no magnets or screws.
Printer
The bed decides what fits in one print. The rest only steers the estimates.
Split
How the plate is cut into pieces that fit the bed. Click a cell line on the map to cut by hand.
Joints
Cut map
10 × 7 cells, 4 pieces, 4 bed loads. Click a cell line to cut or join there.
Pieces4
| Piece | Cells | Size (mm) | Joints | Bed | Material | Time | File |
|---|---|---|---|---|---|---|---|
| Piece 1 | 5 × 4 | 210 × 168 | right: tab, back: tab | Fits | … | … | |
| Piece 2 | 5 × 4 | 210 × 168 | left: socket, back: tab | Fits | … | … | |
| Piece 3 | 5 × 3 | 210 × 126 | right: tab, front: socket | Fits | … | … | |
| Piece 4 | 5 × 3 | 210 × 126 | left: socket, front: socket | Fits | … | … |
Print plan
4 bed loads.
- Bed 1: Piece 1
- Bed 2: Piece 3
- Bed 3: Piece 2
- Bed 4: Piece 4
Preview
Drag to orbit, scroll to zoom. Arrow keys orbit, plus and minus zoom, F fits the model.
Export
Every file is in millimetres; pieces print flat without supports.